|
About Screw Piling
Here at Russell Heale we design, manufacture,
supply, install and certify screw piles.
These can be for a diverse range of building and construction
projects, all the way to 100 tonne load bearing installations.
What is Screw Piling
Steel Screw Piling is necessary for building foundations
where the ground is not compacted, or strong enough or of variable
capacity to carry the structure, for example in sand, mud or reclaimed
land.
Steel screw piling is a deep foundation support system
that transfers the weight of a building onto the stronger founding
layer below. We can use screw piles for loads up to 100 tonnes
and the length of the screw piles can exceed 20 metres.
To install them, we use an excavator with a power head and drive
system designed by Russell Heale.
Steel Screw Piles offer significant advantages over other
piling types. If your job specifies concrete or timber piles,
we can quote the steel screw pile equivalent.
Direct from the Manufacturer
We manufacture the piles to suit each individual job at our Gold
Coast factory. They can then be galvanised if required. See our
technical specs & design page
for more information.
Our base stretches north to Cairns and as far south as Melbourne.
To benefit from our 10 years of experience in this industry, please
call us on:
|
(07) 5593 7755
|
Got a question? Try our FAQ's page. Or
call us on
1300 559 375 or email for more friendly advice.
|
Soil
Tests & Deep Foundations
Don't waste your money on foundations that could potentially
fail. Find out what is beneath your deep foundations and be sure
that they will support your building. For
more information click here.
Screw Piling for Pools
Our principal Operator for pool installations, Grant Massey,
has been a highly experienced Excavator Operator for over 22 years
in the housing, pool building and construction industry. Read
more here.
Limited Access & Barges
Grant Massey in conjunction with Russell Heale have
completed numerous steel screw piling jobs using limited
access machines as well as barges
to deliver equipment.
Latest Project
Colaboration Project - Sep 08:
Crane Base (Caboolture)
With a combined effort between Russell Heale, Q-Pile
Foundations, Rymark Engineers and on-site assistance
from the project team's welders and concreters;
design and installation of pads and screw piers, for this
project was achieved within a remarkable 6 days. For more
details please click here.
To see further case
studies please click here.
Steel Screw Piles have many other applications
such as for shade structures or swimming pools,
and can be for temporary or permanent structures. Some examples:
| • |
Commercial (shopping centres, schools, airport
buildings, surf clubs, factories etc)
|
| • |
Residential (houses, apartments etc)
|
| • |
Swimming Pools
|
These are but a few, for further examples please
check out our Applications page.
Back to top
|
